Electric Fireplace Wall Hanging Ideas
The wall-mount electric fireplaces can be put to go right out of their box. They're a great way to add ambiance without requiring venting or remodeling.
They're usually heavy and require careful installation. Follow these steps to hang your brand new electric fireplace correctly.
1. Connect the Brackets
A wall-mounted or recessed fireplace instantly improves the look of any room. It's a perfect solution for homes that don't have an existing fireplace opening or for apartment residents.
Choose where you'd like to put your electric fire. It's important to find the ideal location that isn't susceptible to moisture and at a minimum of a few inches away from furniture, drapes, and other areas with a lot of traffic. Mark the wall with layout marks to indicate the top and bottom plates for the fireplace frame.
Use a tool, such as a drill to drill exploratory holes in the wall, checking for studs with a stud detector and marking the drywall for the fireplace mounting bracket locations. Next, patch and paint the drywall or create a wall to prepare it for the fireplace installation.
Depending on the wall-mounted fireplace you select, you might need to install both the firebox and screen as one piece or separate them using a wall bracket. If you aren't sure of your capability to complete this task you can hire a general contractor or a seasoned carpenter.
You can find an installation template that comes with all electric fireplaces. However you should keep a spirit level handy and pencil to mark the exact spot where the wall brackets will be installed. Before drilling, make use of the template to verify that the fireplace's power cable is able to reach from the installation site to an outlet near by for a convenient plug in.
Once the studs and the fireplace frame are in place, you can then install a drywall that is as smooth and flush as you can for a clean appearance. Add trim to the bottom edge and paint, sand and then finish the frame.
Most wall-mounted electric fireplaces come with hooks or slots on the back of the unit which you can insert into the slots or hooks on the mounting brackets. Make sure that the slots or hooks are aligned prior to when connecting the fire to wall brackets. Once the fire is installed, you can add additional elements like driftwood logs crystal embers, or decorative rocks.
2. Check the Bottom Bracket
The space above a fireplace, mantel or chimney breast is a prime spot to hang artwork. There is a fine balance between an artistic arrangement and one that does not detract from the overall design of the fireplace.
The general rule of thumb is that a wall should be about 80 percent the width of the mantel or firebox it is placed over. This will help it to be proportional and look aesthetically pleasing on the wall. This rule of thumb could be affected by other ornaments or decorative items on the mantel.
If you're planning to hang a picture above your electric fireplace, it's important that the frame is made of glass or other material that is resistant to high temperatures. If you're not sure, a quick test with a heat-sensitive cloth should reveal whether the frame is suitable for this type of installation.
The risk of damaging artwork due to smoke or stray heat is a common issue when displaying artwork in front of the fireplace. While this isn't a major issue with a traditional gas or wood-powered fireplace, it's worth examining the recommendations of the manufacturer if you're contemplating using an electric fire that is wall-mounted.
Most electric fires come with an installation bracket that can be fixed to the wall with hanging screws or wall-mounted fixing systems. If the latter is the case, it is recommended to make exploratory holes in a distinct area of the wall prior to you attempt to mount your electric fire. Then you can utilize a pipe & cable finder to ensure whether there are any pipes or cables in the vicinity of the position you've chosen for mounting.
If so, you can either mount your fire over the electrical socket or move it to another spot. If you choose to move it to a new location, you'll need to ensure that the power cable will reach from the fire to the electrical socket - this is particularly important for older homes or homes with solid walls. Otherwise the electric fire will not perform as it should. Certain models include a template that indicates where to drill holes for this purpose Some require a spirit level & pencil to mark the appropriate places on your wall.
3. Connect the Power Cord
If you've installed a recessed electrical fireplace, you might need to move the plug socket from the wall to behind the unit. This can create a sleeker appearance. First test the fireplace to make sure it is operating properly.
A third popular way to install an electric fireplace is to frame the space and then build it into the wall. This gives it a finished, traditional look and allows you to build an additional mantel. The owner's guide for your model will include specifics regarding framing, wiring and securing the fire place.
Mark the position of your new electric fireplace on the wall with a marker or pencil. Use a carpenter’s level to make sure that the area of installation is level and flat. You can use a studfinder to mark the location so you know you are drilling in a secure area.
After you've marked your location for installation and marked the location, use your drill to make holes for the bracket screws or hanging screws. Follow the directions in your owner's guide for this step. This is especially important if you're putting the fireplace into drywall. If you're unsure of how to proceed, you can ask a professional for help.
You can also hide power cords from view by using cable organizer kits. These kits typically include sleeves, clips, or boxes for bundling cables. You can make use of wire snakes or fish tape to guide the cables. If you do not want to cut the wall, a powerbridge kit can provide a more secure and more secure connection.
Additionally, you can disguise the wires with paintable covers or by attaching them to the wall and skirting boards. Keep the cover or tacks enough away from heat sources. This will shield the cord from damage and also prevent accidental contact.
4. Connect contemporary electric fires wall mounted -mounted electric fireplace is a fantastic alternative for home renovations or for those who don't have the space or funds to put in a gas fireplace. They are simple to hang and are ready to use straight out of the box. They're an ideal choice for those who want an elegant, modern design or warmth from a fire. These units can be hung on any wall like art, and are electric with fan-powered heat.
It's a good idea to create an inventory of the equipment and tools you will need before you begin the installation process. Read the user's manual to find specific instructions about how to install your electric fire. Certain models require that you screw brackets directly into the wall while others might have an installation plate that slides into slots or hooks on the brackets. It is essential to remove all combustible materials from the area you are installing a recessive unit. In general, these materials should be kept 3 feet from the front of the fireplace and 1.5 feet away from its sides.
After you have checked all the parts After you have checked all the components, plug in your electric fire and ensure that it works. This is a crucial step, as it will ensure the flame effect screen and heater function exactly as they were intended to. This will give you a good idea of the final product's final position.
Once you're satisfied that your electric fire is operating properly, you must think about covering the power cord. This will help to keep the final product neat and neat. You can do this by using paintable wire covers or you can choose to install a new outlet that allows you to place the cord behind the unit. This will give your fireplace a seamless appearance.